Metal stamping to a variety of industries since 1942.  Full capability fabrication from CAD and Engineering to Tooling and Metal Stamping. Value added assembly. ISO 9001:2000 certified.  Harvey Vogel Manufacturing can do more for you!

Metal Stamping Facilities/Equipment
We have full capability to produce short run, medium run and long run metal stampings.

"State of the art CNC stamping presses offer the ultimate in quality, speed and repeatability, as well as accommodating 'quick change tooling'."

"We've expanded our capabilities to produce longer run stampings using progressive dies with our new 400 ton press and 300 and 150 ton straight side presses."

SC2-300 Ton Straight Side Press
The BLISS Model SC2-300 Ton Straight Side Press is a fully automated metal stamping press for a variety of manufacturing applications. This press features a bed sizes of 96" x 54" and supports speeds of 30-60 parts per minute. The BLISS Model SC2-300 is designed for progressive, blanking, forming, transfer, chassis parts and large panel parts. Both the press and feed line are fully integrated with a die protection system, light curtain, sonar loop control and lubrication system. Hydraulic clamping is utilized for quick die changes and ease of transfer.

The Hammerle TRM 50/750 Precision Flat Metal Roll Leveling Machine

Parts that are not flat can cause difficulties in manufacturing and assembly. Precision leveling upgrades the quality of the work piece while contributing to the functional accuracy of secondary forming and other downstream operations.

Precision leveling is the logical solution where close tolerance is the norm. So whether your needs are for a contract leveling source or product design assistance, this new equipment will help us meet all of your leveling requirements.

• Complete Tool Room Facilities:
  • 17 Toolmakers
  • 5 CNC Machining Center (3 Axis/20 Tools with Changer)
  • 4 Wire EDM Machines
  • Complete Programming Center
  • 2 Conventional EDM Machines
  • JIG Drilling Machines
  • Vertical and Horizontal Milling Machines with Digital Readouts
  • Lathes
  • 5 Surface Grinders
  • Sawing Machines
  • Drill Presses
  • 150 ton Hydraulic Arbor Press
  • 3 ton Bridge Crane
• Punch Press Department:
  • 100 presses, capacity ranging from 5 to 400 tons, equipped with quick change set up, air ejection and pneumatic cushions, Coil Reels and Straightening Feeders. Includes:
    • 1 - BLISS 300-Ton Straight Side Press.
      Bed size 54"x96", Speed 30 to 60 SPM
      Fully integrated Die Change and Feed Line System, Maximum Coil 1/4"x32"x8,000 Lbs.
    • 1 - BLISS 150-Ton Straight Side Press.
      Bed size 36"x60", Speed 50 to 120 SPM
      Fully integrated Die Change and Feed Line System, Maximum Coil 3/16"x18"x5,000 Lbs.
    • 1 - 3 ton Bridge Crane
    • 5 - quick change 35 ton presses
    • 1 - quick change 110-ton press
• Fabricating and Prototypes:
  • 2 Turret Presses, U.S. Amada PEGA 244 with Robotic Load/Unload
                                       Amada Vipros 255 with Robotic Load/Unload
  • 6 Brake Presses - 6', 8' and 10' with Micro Processor Controls
• Value-Added Secondary Operations Department:
  • Drill Presses and Tapping Machines for drilling, reaming, tapping, countersinking and counter boring holes
  • Spot welding
  • Miniature Precision Spot Welding
  • Wire Feed Welding
  • Arc Welding
  • Component Assemblies
  • Hammerle TRM 50/750 Precision Flat Metal Roll Leveling Machine
• Deburring Department:
  • Tumbling Barrels
  • 3 Vibrating Units
  • Degreasing System
  • Belt Sanders
  • Grinders
  • Two Timesaver Sanders with automatic parts
  • Washer/rust inhibitor
• Inspection Department:
  • Micrometers
  • Indicators
  • Hite-icator
  • Height Gauges
  • Gauge Blocks
  • Surface Plates
  • Optical Comparator
  • Coordinate Inspection Machine with Hewlett Packard Computer
  • Rockwell Superficial Hardness tester
  • Go-No-Go Gauges
  • Optical Profile Projector (20x), etc.
  • Virtek Laser Optical Computerized Inspection
  • Browne & Sharp Global Image 575 DCC-CMM      Click on item for details
• Assembly Department:
  • 9 Automatic Hardware Insertion Machines
  • 4 Riveting and Staking machines
  • Equipment and facilities established for component assembly and inspection before shipment to customer production line
• Materials Warehouse:
  • Over 1,500 different types and gauges of materials, certified as to physical and chemical properties
  • Isolated and secured storage area for special materials
  • 2 shears, capacity 12 feet - 1/4 thick
• Dock Area:
  • Complete Loading and Unloading Facilities
  • 5-ton Bridge Crane
  • Hand and Fork Trucks
  • 12,500 lbs. Counting Scale
• Shipping:
  • Air
  • Parcel Post
  • Truck U.P.S. (daily pick up, all modes)
  • 2 Counting Scales (small parts plus 12,500# scale)
  • Complete inventory of packaging materials
  • Bar Coded Shipping Labels

Home     Capabilities

Metal Stamping Facility 
© 2008 Harvey Vogel Manufacturing, Co.